8, 24, 48 Port Switch Recommendations

There are multiple switches in the market and their count of ports can come with 8, 12, 24, 48, etc. Among them, 8, 24, 48 port switch are more commonly used. Well, what should be considered before buying 8, 24, 48 port switch? Are there any recommendations for it?

What to Consider Before Buying 8, 24, 48 Port Switch?

When buying 8, 24, 48 port switch in the market, you can consider the following factors.

  • Features – The Gigabit switch has many features. Except for the basic features like VLAN, security, warranty and so on, you’d better take switching capacity, max power consumption, continuous availability into consideration. Moreover, stack and fanless designs are considerable factors as well. Stack design is able to save the place and fanless design helps reduce the power consumption and noise. Besides, you can choose managed switch or unmanaged switch and the former offers better performance than the latter.
  • Switch ports – Except for the number of ports which should be considered, there are some different types of ports based on their port speeds. For example, RJ 45 port, SFP port, SFP+ port, QSFP+ port, QSFP28 port, etc. You can choose a suitable one according to your need.
  • Price – The switches from famous brands are usually costly and there are some three-party networking vendors offering cost-effective switches. If you have limited costs, you can consider buying switches from reliable three-party vendors.

8, 24, 48 Port Switch Recommendations

The right Gigabit switch should meet the needs of your organization and keep your network running efficiently. Here are some switches recommendations for you.

8 Port Switch

If you have only a few devices to be connected, this 8 port Gigabit switch may be a good choice. FS S1150-8T2F 8 port Gigabit PoE+ managed switch has 2 SFP ports, which transmission distance is up to 120km. It is highly flexible that controls L2-l7 data based on physical port and has powerful ACL functions to access. What’s more, it features superior performance in stability and environmental adaptability. This 8 port switch may be one of the best gigabit switches for home network, including weather-proof IP cameras with windshield wiper and heater, high-performance AP and IP telephone.

8, 24, 48 Port Switch

Figure 1: 8 port Gigabit switches

24 Port Switch

If you are looking for the best 24 port Gigabit switch, this S1400-24T4F managed PoE+ switch would be one of your proper choices. It comes with 24x 10/100/1000Base-T RJ45 Ethernet ports, 1x console port, and 4x Gigabit SFP slots. It can protect the sensitive information and optimizes the network bandwidth to deliver information more effectively. This switch is the best fit for SMBs or entry-level enterprises which need to power for the surveillance, IP Phone, IP Camera or wireless devices.

24 port switch

Figure 2: 24 port switch

48 Port Switch

When you need to uplink a Gigabit SFP switch to a higher end 10G SFP+ switch for network upgrade, this 48 port switch can meet your demand. FS S1600-48T4S PoE+ switch offers 4 SFP+ ports for high-capacity uplinks. It also provides integrated L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and Static Routing. What’s more, this solution makes it easier to deploy wireless access point (AP) and IP-based terminal network equipment with PoE technology. This switch would be one of your choices if you need the best managed switch for small business or data center.

48 port switch

Figure 3: 48 port switch

Summary

The best Gigabit switch is the one that suits your network most. When you buying 8, 24, 48 port switch, remember to consider the factors mentioned above. FS provides various switches with high-quality and high performance. If you have any needs, welcome to visit FS.COM.

Related Article: FS 24 Port Gigabit Switch Selection Guide

PoE Switch vs Non-PoE Switch: Which One to Choose?

Instead of non-PoE switch, the PoE switch is more commonly used to build the wireless network. Well, what are PoE switch and non-PoE switch? What is the difference between PoE switch vs non-PoE switch? Which one to choose? In this article, we will share some insights and help solve the above questions.

PoE Switch vs Non-PoE Switch: What Are They?

To understand the PoE switch, we’d better know Power over Ethernet first. PoE is a revolutionary technology that allows network cable to provide both data and power for the PoE-enabled devices. The PoE can provide higher power and reduce a lot of power cables during network. Usually, it is used for VoIP phones, network cameras, and some wireless access points.

PoE switch is a networking device with PoE passthrough which has multiple Ethernet ports to connect network segments. It not only transmits network data but also supplies power via a length of Ethernet network cable, like Cat5 or Cat6. The types of hubs can be classified into 8/12/24/48 port Gigabit PoE switch, or unmanaged and managed PoE network switch. Among the various port designs, the 8 port PoE switch is considered as a decent option for home network and 24 port PoE switch is popular for the business network.

Non-PoE switch, just as the name, is the normal switch, which can only send data to network devices. There is no PoE in the normal switch to supply electrical power for end users over Ethernet.

PoE Switch vs Non-PoE Switch: What’s the Difference?

The biggest difference between PoE switch and non-PoE switch is the PoE accessibility. As mentioned above, the PoE switch is PoE enabled while the non-PoE switch is not PoE enabled.

For PoE switch, you can mix PoE and non-PoE devices on the same one. Because if there is no need to use power, you can turn off the PoE of the PoE switch and use it as a regular witch. However, non-PoE switch can’t support the mixing of PoE and non-PoE devices.

For non-PoE switch, it can be PoE ready only by installing a PoE injector to power a few devices. The injector is able to add electrical power and then transmits both data and power to power devices simultaneously. Users require one extra cable to connect power outlets. In this solution, if a PoE injector goes out, it only affects one device. But if the PoE goes out in a PoE switch, all PoE devices will be down.

PoE switch vs non-PoE switch

Figure 1: PoE switch vs non-PoE switch

PoE Switch vs Non-PoE Switch: Which One to Choose?

Many users may encounter this problem. Should we choose PoE switch or non-PoE switch? Though the non-PoE network switch can also acquire PoE by installing injector. But PoE switch has some advantages over the non-PoE switch.

Flexibility – The PoE switch is powered through existing PoE network infrastructure and eliminates the demand for additional electrical wiring. This gives you flexibility to employ the switch wherever you need.

Good performance – PoE switch is designed with advanced features like high-performance hardware and software, auto-sensing PoE compatibility, strong network security and environmental adaptability. It provides better performance for users.

Cost-efficient – There is no need for users to purchase and deploy additional electrical wires and outlets with PoE switch. Therefore, it makes great savings on installation and maintenance costs.

Conclusion

After the comparison of PoE switch vs non-PoE switch, do you know which one to choose? Actually, it depends on your real needs. FS is a good place to go for the reliable and cheap PoE or non-PoE network switch. Welcome to contact us if you have any needs about it.

Related Article: 24 Port Managed PoE Switch: How Can We Benefit From It?

How to Choose an 8 Port Gigabit Switch?

There are many different network switch in the market and it comes with 8, 16, 24 or 48 ports. Among them, 8 port Gigabit switch is regarded as a cost-effective choice for small-sized families and business use. Then, how to choose an 8 port Gigabit switch? Are there any recommendations for it?

How to Choose an 8 Port Gigabit Switch?

The 8 port Gigabit switch is available in several types, including PoE or Non-PoE, managed or unmanaged, stackable or standalone. The following will tell you how to choose an 8 port switch from these types.

Power over Ethernet (PoE) or Non-PoE Switch

There is no doubt that a Gigabit PoE switch is better than the Non-PoE one. A Gigabit PoE switch is able to transmit both data and power supply over the existing Ethernet cable to network device at the same time. It can help reduce the cabling complexity and save the cost of installation and maintenance. Usually, it is used for VoIP phones, network cameras and some wireless access points. The 8 port Gigabit PoE switch is one of the most popular PoE switches for IP camera system.

Unmanaged or Managed Switch

Unmanaged switch, as a plug & play switch, has limited performance and doesn’t support any configuration interface or options. While managed switches can offer good protection of the data plane, control plane, and management plane. Besides, it is also able to incorporate Spanning Tree Protocol (STP) to provide path redundancy in the Ethernet network. Additionally, managed switch enables more bandwidth to be contributed through the network. This function brings higher network performance and better transmission of delay-sensitive data. For your home use, a managed 8 port Gigabit switch may be a better choice.

Stackable or Standalone Switch

In the use of standalone switches, each switch is managed and configured as an individual entity. However, with the improvement of the network, you will need more switches to connect the devices. So the stackable switch has emerged. Compared to the use of multiple standalone switches, stackable switches provide simplicity, scalability, and flexibility to your network.

8 Port Gigabit Switch Recommendation

FS S1150-8T2F 8 port Gigabit PoE+ managed switch has 8x 10/100/1000Base-T RJ45 Ethernet ports, 1x console port, and 2x Gigabit SFP slots. The transmission distance of its SFP fiber port can be up to 120km, and with high resistance to electromagnetic interference. Besides, this switch complies with PoE+ standard for higher power capacity than PoE standard. It is highly flexible that controls L2-l7 data based on physical port and has powerful ACL functions to access. It also features superior performance in stability, environmental adaptability. This 8 port switch is best fit for weather-proof IP cameras with windshield wiper and heater, high-performance AP and IP telephone.

8 port Gigabit switch

Figure 1: 8 port Gigabit switches

Conclusion

The 8 port Gigabit switch is a cost-effective and efficient solution to satisfy the demands of bandwidth-intensive networking applications. Before buying an 8 port Gigabit switch, you’d better take the quality, power requirement, price, into consideration. If you are looking for the best 8 port Gigabit switch, FS.COM would be one of your proper choices.

Related Article: Using 8 Port PoE Switch for IP Surveillance System

What Is SFP+ Switch And How to Choose It for Home Use?

10G for home use is more and more commonly. When setting up the 10G network for home, people may pay much attention on the SFP+ switch, including its type, performance, price, etc. But do you really know what the SFP+ switch is and how to choose it for your home use?

What Is an SFP+ Switch?

As a network switch, SFP+ switch is used for directing the bandwidth of the network connection to multiple network wired devices. It is also called 10gb switch or 10 Gigabit switch, because it can support up to 10Gb uplink connection. Usually, SFP+ switch works at the data link layer (layer 2) or the network layer (layer 3) of the OSI (Open Systems Interconnection) model. That’s to say, some 10Gb switches may be the Layer 2 switch, and some may be the Layer 3 switch.

SFP+ switch

Figure 1: SFP+ switch

SFP+ Switch vs. 10GBASE-T Switch

For 10Gb switch solutions, SFP+ switch and 10GBASE-T switch are two popular choices. 10GBASE-T is an interoperable, standards-based technology that uses RJ45 connector. It can provide backwards compatibility with legacy networks. While SFP+ fiber switch offers little or no backwards compatibility. However, the SFP+ switch uses less power consumption than 10GBASE-T switch. Moreover, SFP+ switch offers better latency with about 0.3 microseconds per link while 10GBASE-T latency is about 2.6 microseconds per link. The last but not the least, the price of 10GBASE-T switch is dramatically dropped down now, so it is cheaper than SFP+ switch. All in all, if cost, flexibility and scalability are more important for you, 10GBase-T solution may be your ideal choice. If you want to lower power consumption and latency, you’d better consider SFP+ solution.

How to Choose SFP+ Switch for Home Use?

When choosing an SFP+ switch for home use in the market, you’ll find there are many options. Here is a guide for you.

Port type – The 10G switch often comes with 10G SFP+ ports, RJ45 or SFP combo ports, and a console port. 10G SFP+ ports are used for uplinking connections and combo ports are deployed for accessing networks. The count of the main ports often come with 8, 12, 24 or 48. Besides, the 8-port and 12-port SFP+ switches are commonly used for home. You can choose a suitable one based on your need.

Performance – 10G switch is a high-compatibility and network-scaling application. It supports advanced features, including MLAG, SFLOW, SNMP, etc. And it facilitates the rapid service deployment and management for both traditional L2/L3/IPv6 networks. You can make a choice according to the detailed features such as the angles of switching capacity, power budget, and switching layer.

Vendor – A reliable vendor can not only offer good-quality switches, but also can help customers solve other problems such as cost, network solutions and so on. Famous brands like Cisco, HP and Dell provide 10Gb switch at the higher price in the market. While some 3rd-party vendors like FS.COM can offer low price but quality switches. If you have cost problem or want to get cost-effective products, you can consider the reliable 3rd-party vendors.

Summary

This article presents some basic information about SFP+ switch for home use. FS provides comprehensive 10G switch solutions, including 10Gb switch, optical transceivers, and cables. If you want to know more about 10Gb switch solutions, welcome to visit FS.COM.

Related Article: Choose 10GBASE-T Copper Over SFP+ for 10G Ethernet